 |
"DH"
Series Double -Layer Rotary Tablet
Machines, can be proven to be reliable for :
* Bi-layer design for up to 58,000 tpm
* Single layer capable to 200,000 tpm
* Compression force to 10 tons
* For medium to large batch production;
* Allow for single layer tabletting purpose with double-sided
output;
* Accurate tabletting;
* Tabletting compartment separated from drive mechanism;
* Mechanical compression system;
* Easy maintenance & cleaning ;
* Meets GMP;
|
|
.............................................................................................................................................................................
|
|
Machine
drive is completely separatd from the press space
Direct rotation of the turret by the main shaft reduces the noise
level.
The gearbox, with a casehardened nickel steel ground worm and bronze
wormwheel, it provides maximum protection to the gears and the drive
system.
Mechanical compression system
The design of machanical compression system can be ensured for longer
production runs.
Pressure rollers are made of special tool steel that ensures uniform
pressure application, the double bearings are fitted,which minimize
wearing of the rollers.
Cam
design & lubrication
A central lubrication system supplies oil continuously to lower
punches, while grease applied manually lubricates upper punches.
The ejection cam is manufactured from apecial tool steel for extended
life, while a double sided lifting cam is provided.
Cleaning and tool changeover
The detachable panels can be removed easily, which reveal the entire
lower punch cams. This allows easy removal of the lower punches.
|
.............................................................................................................................................................................
|
|
Upper
& Lower punch seals
The scrapers seals for the upper punches protect tablets from oil
drip, while the dust seals on the lowers prevent the punches from
binding and reduce wear on the cam.
This combined with an efficient dust extraction system allows prolonged
run with little downtime for cleaning.
Multi-Layar Tabletting Purpose
The machine is designed for double-layer tabletting purpose with
single-sided output, it can also be easily converted for single
layer tablet production, but with double-sided output. Both layers
can be easily weight controlled respectively.
|
|
|
Difficult
products
Although not equipped with pre-compression as standard, the ¡§DH¡¨
series machine can be provided with special parts to allow one side
of the press to be used as a pre-compression featuhes.
|
.............................................................................................................................................................................
|
| MODEL |
JC-DH-23D
|
JC-DH-29DB
|
JC-DH-29B
|
JC-DH-35BB
|
| Type
of tooling |
EU"D" |
EU"DB" |
EU"B" |
EU"BB" |
| Number
of station |
23 |
29 |
29 |
35 |
Tablet
diameter
Max |
25.4mm
1"
|
19mm(caplet)
(0.74") |
16mm
(0.625") |
13mm
(0.50") |
Production
capacity tablets/hours (60HZ)*
Single layer |
33,000-132,000 |
42,000-167,000 |
50,000-200,000 |
Production
capacity tablets/hours (60HZ)*
Double layers |
16,500-42,000 |
21,000-52,000 |
25,000-58,800 |
| Revolutions
of Turret / Min (60Hz) |
12-48
RPM |
| Depth
of filling adjustable to |
19mm
(0.75") |
17mm
(0.67") |
| Max
pressure |
10,000
kgs(22,000lb) |
| Diameter
of die |
38.1
(1.5") |
30.16mm
(1.1875") |
24mm
(0.945") |
| Die
of height |
23.81mm
(0.9375") |
22.22mm
(0.875") |
| Nominal
diameter of punch body |
25.4
mm (1") |
19mm
(0.75") |
| Turret
P.C.D. |
365mm |
| Power
consumption |
3HP
(2.2kw) |
| Machine
dimensions |
1,000
x 1,100 x 1,650 not including hopper |
| Net
weight |
1,800kgs
(3,960lbs) |
*
|
Subject to the characteristics
of the powder. |
| * |
The manufacturer reserves
the right to modify the design, specification, etc., to improve
the performance of the machine without notice. All the specification
shown are just for reference. |
|
STANDARD
FEATURES :
1.Slotted turret head
2.Electric tachometer
3.Dust extraction system
4.R.P.M. Indicator
|
OPTIONAL
FEATURES :
1.Chromium coating device for die table
2.Feeding hopper with vibrating device
3.Paint-free tabletting zone
4.Outside allover covered with SUS#304
5.Tablet deduster, Model : TP-500 |
.............................................................................................................................................................................
JENN-CHIANG
MACHINERY CO., LTD.
No.69, Hezuo St., Fengyuan Dist., Taichung City 420, Taiwan // P.O. Box 391, Feng-Yuan
Taiwan.
Tel : 886-4-2532-3045 . 2534-7066 // Fax :
886-4-2533-7545
E-mail : jcmco@ms8.hinet.net
|
|
|
